PRACTICAL GUIDE: INSTALLING AND MAINTAINING A BIDET TRAP

Why choose an adjustable bidet trap?

An adjustable bidet trap is designed to provide reliable drainage while making installation easier, even in confined spaces.

The model presented here offers:

• an adjustable tube for flexible installation,
• a compact design that fits neatly beneath the bidet,
• tool-free assembly,
• quick and easy maintenance,
• spare parts available for up to 20 years.

Required tools and materials

No tools are required for installation.

Simply prepare:

• the complete trap assembly,
• the supplied seals and fittings,
• the bidet drainage connection.

Adjustable bidet trap installation steps

1. Assemble the adjustable tube

Begin by assembling the upper section of the trap.

Position:

• the adjustable tube,
• the plastic nuts,
• the conical gasket.

Ensure that each component is correctly aligned before tightening.

2. Connect the trap body

Attach the trap body to the adjustable tube.

Make sure that:

• the conical gasket is properly seated,
• the plastic nuts are correctly tightened,
• the assembly remains straight and secure.

The adjustable design allows you to adapt the installation to the available space beneath the bidet.

3. Install the trap bowl

Position the O-ring seal on the trap body and screw the compact trap bowl into place.

This component creates the water seal that prevents unpleasant odours from rising through the drain.

⚠️ Check that the O-ring is correctly positioned before tightening the bowl.

4. Connect the waste outlet

Insert the waste pipe into the outlet connection of the trap.

Then:

• position the conical gasket,
• tighten the plastic nut,
• verify that the connection is secure.

Proper installation ensures smooth drainage and leak-free operation.

5. Connect the trap to the bidet

Attach the upper section of the trap to the bidet waste outlet.

Position the flat gasket correctly between the trap and the waste connection.

Tighten the nut by hand until secure.

6. Test the installation

Once installation is complete:

1. run water through the bidet,
2. check all connections,
3. inspect the trap for leaks,
4. ensure that water drains freely.

Your installation is now ready to use ✅

How to maintain your bidet trap

Regular maintenance helps prevent blockages and ensures optimal drainage performance.

Quick cleaning

The compact trap bowl can be removed easily for cleaning.

To maintain the trap:

1. unscrew the trap bowl,
2. remove any accumulated debris,
3. rinse thoroughly with clean water,
4. reinstall the bowl.

Maintenance typically takes only a few minutes.

Checking the seals

During maintenance, inspect:

• the flat gasket,
• the conical gasket,
• the O-ring seal.

Replace worn seals if necessary to maintain watertight performance.

Leak test after maintenance

After reassembly:

• run water through the system,
• verify that all connections remain watertight.

This simple check helps ensure long-term reliability.

Repairability and spare parts

Good news: spare parts for this adjustable bidet trap remain available for 20 years.

Replaceable parts include:

• flat gasket,
• adjustable tube,
• plastic nuts,
• conical gasket,
• trap body,
• O-ring seal,
• compact trap bowl.

This repairable design helps extend the lifespan of the installation while reducing replacement costs.

In summary

The 32 mm adjustable bidet trap combines:

✅ tool-free installation
✅ compact design
✅ adjustable configuration
✅ quick maintenance
✅ long-term repairability

An ideal solution for a reliable, practical, and durable bidet installation.

Source: Valentin technical instructions – 32 mm adjustable bidet trap.